Asgard Shed Guttering Fixing Kit
Back to: Accessories
£30 RRP £35
Guttering fixing kit for Sheds - Harvest water from your Asgard metal shed
The Asgard Shed Guttering Kit allows you to collect rainwater from your metal shed roof, helping you effortlessly store water for your garden or allotment when you need it most.
Designed to seamlessly fit onto your Asgard metal shed (see compatibility list below), these shed gutter brackets utilise pre-drilled holes to slide in between the shed panel and the roof - securely clamping into position. With an adjustable tolerance, the brackets create a gentle fall, ensuring water quickly drains away into the waterbutt.
These shed gutter brackets are designed to fit with readily available FloPlast Mini Line half-round fascia brackets (76mm), gutters, stop end outlets, downpipes, and your chosen waterbutt (not included) for a full shed guttering system.
Shed Compatibility: Centurion Shed Range, Gladiator Shed Range, Workshop Shed, Flexistore Range, Saracen Shed, Sentry Shed. - Apex roof models
Please ensure you’re shed guttering is regularly cleaned to ensure the water quickly flows away and does not interfere with the ventilation system.
How much water will I save?
Cleaning a mountain bike uses approx 30 - 35 litres of water.
The water butt shown here (and our test rig) is 100 litres.
Our test shed filled 100 litres in one day (it was a storm though)
"The average showerhead uses 12 litres of water per minute, with power showers using around 15 litres. Recommended shower length is 4 minutes" 50 liters of water - Wikipedia
So, you can have 2 "free" showers if you clean your bike with rainwater - or cleaning a bike uses a similar amount of water as an after-ride shower*
*This is a "fun fact" and an approximation based on our own estimates and Andy (Asgard) cleaning his MTB using rainwater.
This price is for the ASGARD clip pack only -The guttering pipes and guttering "C" clips are not included. These are the Asgard metal clips only. See our dims page for details.
As A "RULE OF THUMB," 2 clips per section of your shed will be sufficient to hold the guttering in place.
Product Code: ASGGUTTERBRKTAPT
ASGGUTTERBRKTAPT
Shed Guttering Fixing Kit:
- Includes: 16 x shed guttering clips - secure to Flexistore, Sentry, Saracen, Centurion, Gladiator or Workshop shed.
- Includes: 10-year warranty - this metal guttering bracket is designed to last.
Asgard Guttering Fixing Kit Features
- Harvest rainwater from your shed - for the full garden/allotment shed set-up.
- Made from galvanised steel - designed to last the British weather.
- Metal shed bracket in dark grey only.
- Designed to create a slight fall - allows water to quickly drain away.
- Designed to fit FloPlast Mini Line 76mm guttering clips, gutter, stop end outlet, and downpipe - available from most DIY stores.
- Can be retrofitted to Asgard sheds - see our instruction guide for further details.
- Delivered in 2 weeks - if ordered independently of an Asgard shed.
Please note: if you have ordered this kit with an Asgard shed and Asgard shed installation service, We will install the gutter brackets ONLY during installation, if our team are able to do so at the time as building the shed. We will not install the guttering itself.
Please note: You may have some brackets left over when using this pack with smaller sheds as we supply packs of 16 as standard. We recommend 2 x brackets per shed panel.
The guttering pipes and guttering "C" clips are not included. These are the Asgard metal clips only. See our dims page for details.
Please note: The Asgard guttering system is a direct feed to your water butt. Once full, this may overflow or backfill to your guttering and MAY cause leakage issues into your shed. We recommend you fit an overflow pipe as this will allow the water to drain away without impacting on the shed. Please ensure your shed guttering is regularly cleaned to ensure the water quickly flows away and does not interfere with the ventilation system.
